Professional slicer from the leading Italian manufacturer of cutting machines (slicers) Essedue. Slicer Essedue is made from a special hygienic anti-corrosion aluminum alloy. Built-in sharpening device. A deep slicer carriage, a thickness regulator, a small area of the cutting surface make it possible to obtain high-quality cutting of a wide variety of products into slices of the same thickness. Due to its compact size and ease of maintenance, the equipment can be used at home.
Professional slicer model 275 - from the leading Italian manufacturer of cutting machines (slicers) Essedue. Slayser Essedue 275 is made of a special hygienic anti-corrosion aluminum alloy. Built-in sharpening device. The deep slicer carriage, thickness regulator, cutting surface area allow to obtain high-quality cutting of a wide variety of products into slices of the same thickness. Due to its compact size and ease of maintenance, the equipment can be used at home. Options: For slicing cheeses it is recommended to use a knife with a special Teflon coating.
Professional slicer model 300 - from the leading Italian manufacturer of cutting machines (slicers) Essedue. Slayser Essedue 300 is made of a special hygienic anti-corrosion aluminum alloy. Built-in sharpening device. The deep slicer carriage, thickness regulator, cutting surface area allow to obtain high-quality cutting of a wide variety of products into slices of the same thickness. Due to its compact size and ease of maintenance, the equipment can be used at home. Options: For slicing cheeses it is recommended to use a knife with a special Teflon coating.
Sirman Slicers , model Galileo 370 Evo Aut. Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220V single phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- G&B blade.
- Ergonomic controls - pushbuttons with IP67 protection rating
- 3-speed selection
- 3 different adjustments for carriage travel
- Slice counter
- Slice number setting with automatic stop feature
- Enclosed and sealed drive motor
- Positive drive belt
- Output slices per minute: 24 - 46
- Aluminium telescopic feet with rubber base.
- Maintenance tool kit.
Sirman Slicers , model Galileo 370 Evo Aut. :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob.
- Rubber feet.
- Ergonomic controls - pushbuttons with IP67 protection rating.
- 3-speed selection.
- 3 different adjustments for carriage travel.
- Slice counter.
- Slice number setting with automatic stop feature.
- Enclosed and sealed drive motor.
- Positive drive belt.
- Output slices per minute: 24 - 46.
Sirman Slicers, model Anniversario 300:
- Enamelled aluminum alloy.
- Parts made of stainless steel and silver anodized aluminum.
- Knife 300.
- Patented displacement system (without visible mechanical components).
- The lock lever sausage and ham products BS1.
- Easy to install moving plates.
- Ergonomic, smooth operation and practicality when cleaning.
- Fully disassembled trolley for cleaning.
Sirman Slicers , model Anniversario Lx 350 :
- Anniversario LX: a perfect mix of classical elegance with modern functionality.
- Fusion of style and ergonomics, easy use and good taste, practical and exclusive.
- A poem of lines, lights, colours and technics, pure, simple and durable technics... A real dream!
- Solid cast iron construction epossidic painted.
- Carriage and other details made of anodized alluminium alloy.
- BS2 self adjusting blocking arm
- Stainless steel removable pushern.
- Carriage easy to remove.
ESSEDUE company offers a wide range of slicers, available at a price and having modifications both for use at home and at work.
- The body is made of anodized aluminum alloy, hygienic and easy to clean;
- A deeper carriage allows you to cut more products;
- The smaller cutting area ensures greater safety of work with the slicer;
- Less weight and size;
- Regulator for controlling the thickness of cutting from 0 to 15 mm;
- Sharpening device;
- The optimal ratio "price - quality."
Professional slicer model 350 - from the leading Italian manufacturer of cutting machines (slicers) Essedue. Slayser Essedue 350 is made of special hygienic anti-corrosion aluminum alloy. Built-in sharpening device. The diameter of the knife - 350 mm. The deep slicer carriage, thickness regulator, cutting surface area allow to obtain high-quality cutting of a wide variety of products into slices of the same thickness.
Sirman Slicers , model Galileo 385 Evo Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Buttons in insulated stainless steel (IP 67) in housing.
- Protection rating.
- Maintenance tool kit.
Sirman Slicers , model Canova 250 Top :
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
Sirman Slicers , model Canova 250 :
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- 38° blade inclination.
- Plastic knob.
- Rubber feet.
- Switch with IP44 protection rating.
Sirman Slicers , model Canova 275 Top:
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- 38° blade inclination.
- Aluminum handle.
- Aluminum telescopic legs with a rubber base.
- IP 67 stainless steel buttons.
Sirman Slicers , model Canova 275 :
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- 38° blade inclination.
- Plastic knob.
- Rubber feet.
- Switch with IP44 protection rating.
Sirman Slicers , model Canova 300 Automec
- The Canova Automec series offers the same outstanding feautures of the Canova series adding.
- Welded and rounded stainless steel automatism structure.
- Piston/rod system carriage motion
- Fan-cooled carriage motion motor with commercial-grade oil bath reduction
- Blade and carriage motion powered by separate controls
- An easily accessible switch arm can convert the unit from automatic to manual operation
- Two control systems:
Standard on/off
Variable speed available (VV versions).
Output slicer per minute min. 10 - max 50
Optionals:
- Carriage "Nettuno" available with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly
- Slice counter.
Sirman Slicers , model Canova 300 Top :
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
Sirman Slicers , model Canova 300 :
- Rounded design and no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 41 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob.
- Rubber feet.
- Switch with IP44 protection rating.
Sirman Slicers , model Galileo 350 Evo Aut. :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Ergonomic controls - pushbuttons with IP67 protection rating
- 3-speed selection
- 3 different adjustments for carriage travel
- Slice counter
- Slice number setting with automatic stop feature
- Enclosed and sealed drive motor
- Positive drive belt
- Output slices per minute: 24 - 46
- Aluminium telescopic feet with rubber base. -
Sirman Slicers , model Galileo 350 Evo Aut. :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob.
- Rubber feet.
- Ergonomic controls - pushbuttons with IP67 protection rating.
- 3-speed selection.
- 3 different adjustments for carriage travel.
- Slice counter.
- Slice number setting with automatic stop feature.
- Enclosed and sealed drive motor.
- Positive drive belt.
- Output slices per minute: 24 - 46.
Sirman Slicers , model Galileo 350 Evo Ingr. :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob
- Rubber feet
- Plastic pushbuttons with IP67 protection rating
- Enclosed and sealed worm gear reduction unit
- Oil bath lubrication
- Automatic model unavailable
Optional Stonehenge
- Cast aluminum alloy with special ceramic coating treatment
- Ideal for sticky products processing
- Excellent product gliding and easy to clean
- Highly resistant to acids and sanitizing chemicals
- Removable parts are dishwasher safe
- Aluminum-gray finish colour
Sirman Slicers , model Galileo 350 Evo Ingr. :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob
- Rubber feet
- Plastic pushbuttons with IP67 protection rating
- Enclosed and sealed worm gear reduction unit
- Oil bath lubrication
- Automatic model unavailable
Sirman Slicers , model Galileo 350 Evo Power Top :
- Ergonomic controls - pushbuttons with IP67 protection rating.
- 3 speed selection.
- 3 different adjustments run for carriage.
- Positive drive belt on carriage.
- Especially designed for slicing frozen meat up to - 10°C (14 °F).
- Sturdy stainless steel trestle with casters to provide stability.
- Output slices per minute: 24 - 46.
Sirman Slicers , model Galileo 350 Evo Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Buttons in insulated stainless steel (IP 67) in housing.
- Protection rating.
- Maintenance tool kit.
Optional Stonehenge:
- Cast aluminum alloy with special ceramic-teflon coating treatment
- Ideal for sticky products processing
- Excellent product gliding and easy to clean
- Highly resistant to acids and sanitizing chemicals
- Removable parts are dishwasher safe
- Aluminum-gray finish colour.
Available versions:
- Stonehenge: table, blade cover, carriage, end weight
- Stonehenge Plus: base, table, knife rim guard, blade cover, carriage, end weight, sharpener housing
Sirman Slicers , model Galileo 350 Evo :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220V single or 220-280V three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Buttons in insulated stainless steel (IP 67) in housing.
- protection rating.
- Maintenance tool kit.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Optional accessories:
- Food fence.
- Vegetables cute.
Optional Stonehenge:
- Cast aluminum alloy with special ceramic-teflon coating treatment
- Ideal for sticky products processing
- Excellent product gliding and easy to clean
- Highly resistant to acids and sanitizing chemicals
- Removable parts are dishwasher safe
- Aluminum-gray finish colour
Available versions:
- Stonehenge: table, blade cover, carriage, end weight
- Stonehenge Plus: base, table, knife rim guard, blade cover, carriage, end weight, sharpener housing
Sirman Slicers , model Galileo 370 Evo Ingr. Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220V single phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- G&B blade.
- Aluminium telescopic feet with rubber base.
- Stainless steel push buttons with IP67 protection rating.
- Maintenance tool kit.
- Enclosed and sealed worm gear reduction unit
- Oil bath lubrication
- Automatic model unavailabl
Sirman Slicers , model Galileo 370 Evo Aut. Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220V single phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Plastic knob
-Rubber feet
-Plastic pushbuttons with IP67 protection rating
-Enclosed and sealed worm gear reduction unit
- Oil bath lubrication
-Automatic model unavailable
Sirman Slicers , model Galileo 385 Evo Top :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Buttons in insulated stainless steel (IP 67) in housing.
- Protection rating.
- Maintenance tool kit.
Sirman Slicers , model Galileo 370 Evo :
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector.
- Stainless steel screws and fittings.
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Safety ring on table shaft to prevent liquids from seeping inside the machine.
- Easily removable blade cover
- Bottom cover.
- Changeover electronic circuit 110-220-380 V single and three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 38° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Buttons in insulated stainless steel (IP 67) in housing.
- protection rating.
- Maintenance tool kit.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protecion rating.