Sirman Slicers , model Tiziano 370 Evo VCS:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Sirman Slicers , model Tiziano 370 Evo VCS Top:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Aluminum knob.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
- Maintenance tool kit.
Sirman Slicers , model Tiziano 370 Evo BS1:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
- Easy to remove stainless steel meat grip arm.
Sirman Slicers , model Leonardo 350 Evo VCS:- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Sirman Slicers , model Tiziano 350 Evo VCS:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Sirman Slicers , model Leonardo 350 Evo VCS Top:
- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Aluminium knobs.
- G&B blade.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
- Maintenance tool kit and demo CD.
Sirman Slicers , model Tiziano 350 Evo VCS Top:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Aluminum knob.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
- Maintenance tool kit
Sirman Slicers , model Leonardo 350 Evo BS3:- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Plastic knob.
- Rubber feet.
- Stainless steel pushbuttons with IP67 protection rating.
- Water-resistant, double-sealed articulating arm (except dishwasher, pressure washer, immersion).
- Easy to open and adjust thanks to the ergonomic handle.
- While opening it automatically backs off the blade.
- Toggling and removable stainless steel end weight to hold products firmly in place.
Sirman Slicers , model Leonardo 350 Evo BS3 Top:- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Aluminium knobs.
- G&B blade.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
- Maintenance tool kit and demo CD.
- Water-resistant, double-sealed articulating arm (except dishwasher, pressure washer, immersion).
- Easy to open and adjust thanks to the ergonomic handle.
- While opening it automatically backs off the blade.
- Toggling and removable stainless steel end weight to hold products firmly in place.
Sirman Slicers , model Leonardo 350 Evo BS2:- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
- Easy to remove stainless steel meat grip arm.
Sirman Slicers , model Leonardo 350 Evo BS2 Top:- Rounded design and no sharp edges or visible screws.
- Size can fit 70 cm deep table
- low profile reduced friction blade
- Chrome plated ground and lapped slide rod.
- smooth sliding thanks to lapped iron bushings
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Stainless steel slice deflector.
- Hermetic pulley
- Blade pulley without centre hole to facilitate cleaning.
- Adjustable slicer table movement in the first 3 mm of opening, guarantees higher cutting precision of thin slices.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Built-in sharpening tool with bottom protection.
- Easy to remove grease guard.
- Standard blade removal tool.
- 70 mm distance between blade and motor.
- Aluminium knobs.
- G&B blade.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection rating.
- Maintenance tool kit and demo CD.
- Easy to raise arm with ergonomic handgrip.
- Amply dimensioned stainless arm easy to remove.
- Tray and slides perfectly parallel, and with raised plate for improved food grip.
Sirman Slicers , model Tiziano 350 Evo BS1:
- Innovative rounded design and no sharp edges or visible screws.
- Chrome plated ground and lapped slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanised rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with snap-on bayonet fitting
- Stainless steel screws and fittings.
- Bottom cover for accessing electrical Components.
- Changeover electronic circuit 110-220-380 V single and three-phase.
- Built-in sharpening tool with bottom protection.
- Enclosed and sealed belt pulley.
- Aluminium knobs
- Aluminium telescopic feet with rubber base
- Stainless steel pushbuttons with IP67 protection rating
- Maintenance tool kit and demo CD
- 48 mm distance between blade and motor.
Sirman Slicers , model Smart 250 :
- Painted aluminium body.
- Anodized aluminium components
- Ergonomic food-presser made of die-cast aluminum with teeth shaped to best block the product to cut.
- Wide space between motor and blade for easy cleaning.
- Ventilated motor for continuous work.
- Carriage running on self-lubricating bushes and lapped pins.
- Cast-in sharpener body assembly with 2 standard emery-wheels.
- Compact dimensions but great cutting capacity.
- Devise for releasing the carriage on CE version.
- 25° blade inclination.
Sirman Slicers , model Smart 220 :
- Painted aluminium body.
- Anodized aluminium components
- Ergonomic food-presser made of die-cast aluminum with teeth shaped to best block the product to cut.
- Wide space between motor and blade for easy cleaning.
- Ventilated motor for continuous work.
- Carriage running on self-lubricating bushes and lapped pins.
- Cast-in sharpener body assembly with 2 standard emery-wheels.
- Compact dimensions but great cutting capacity.
- Devise for releasing the carriage on CE version.
- 25° blade inclination.
Sirman Slicers , model Raffaello 370 Evo :
- Rounded design, no sharp edges and visibile
screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge
plate.
- Stainless steel slice deflector.
- Blade pulley without centre hole to facilitate
cleaning.
- Adjustable slicer table movement in the first
3 mm of opening, guarantees higher cutting
precision of thin slices.
- Safety ring on table shaft to prevent liquids from
seeping inside the machine.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 49,5 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220V single or 220-280V three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 35° blade inclination.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Sirman Slicers , model Raffaello 350 Evo :
- Rounded design, no sharp edges and visibile
screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge
plate.
- Stainless steel slice deflector.
- Blade pulley without centre hole to facilitate
cleaning.
- Adjustable slicer table movement in the first
3 mm of opening, guarantees higher cutting
precision of thin slices.
- Safety ring on table shaft to prevent liquids from
seeping inside the machine.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 49,5 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220V single or 220-280V three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 35° blade inclination.
- Plastic knob.
- Rubber feet.
- Plastic pushbuttons with IP67 protection rating.
Sirman Slicers , model Raffaello 350 Evo Top :
- Rounded design, no sharp edges and visibile
screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge
plate.
- Stainless steel slice deflector.
- Blade pulley without centre hole to facilitate
cleaning.
- Adjustable slicer table movement in the first
3 mm of opening, guarantees higher cutting
precision of thin slices.
- Safety ring on table shaft to prevent liquids from
seeping inside the machine.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 49,5 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220V single or 220-280V three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 35° blade inclination.
- Aluminium knob.
- Aluminium telescopic feet with rubber base.
- Stainless steel pushbuttons with IP67 protection
rating.
- Maintenance tool kit.