In Stock
Winterhalter UF-M
The UF-M is a pan washing machine that was specifically designed for large-sized washing items, such as pots, pans, gastronome containers, baking sheets and other kitchen utensils. In the standard, the machine has a soak routine that reduces manual pre-cleaning. With the innovative TurboZyme system (soaking with enzyme-based burner solvent), unsurpassed hygienic cleanliness. After pre-soaking, the newest high-performance cleaning system, which guarantees full coverage inside the volume of the washing chamber, allows you to get the best cleaning result, even with persistent soiling. The UF series has the option of pre-rinsing with cold water, which provides the best washing result for starch or protein persistent pollution.TECHNICAL PARAMETERS UF-M HighTemp
Dimensions
W x D x H: 775 x 870 x 1,720 mm
Depth when door open: 1,295 mm
Depth when door closed: 870 mm
Height when door open: 2,000 mm
Depth when door closed: 1,720 mm
Wash rack size (W x D): 612 x 672 mm
Entry height: 640 mm
Entrance width: 651 mm
Water connection: G ¾ ”
Drain connection: ø 40/50 mm
Duration of the cycle (does not depend on the option)
Standard program: 90 - 300 sec.
Short subprogram: 56 - 157 sec.
Basic data
Weight (net / gross): 190/220 kg
Tank capacity: 69 l
Washing pump (program dependent): 410 - 500 l / min
Noise level: <70 dB (A)
Moisture Protection: IPX5
Load on the floor under the leg
Standard: 68 kg
Connecting to the water
Inlet pressure: 1.0 - 6.0 bar
Water flow HighTemp:> 5,5 l / min.
Temperature Rin. water max. HighTemp 66 ° C
Max. theoretical performance (HighTemp 10 / 15 / 20 baskets / hour
Short subprogram (does not depend on the variant) 64/42/23 baskets / hour
Rinse consumption (ideal conditions) 4.7 liters per wash cycle
Marks of conformity EAC, CB, SVGW, WRAS
Heat radiation (not depending on the variant)
Direct / hidden: 0.9 / 0.4 kW
Emissions (not dependent on option)
Cubic meters / h: 302
Relative humidity: 100%
Temperature: 60 ° C
Specifications:
▪ Program options target groups: butchers, bakers, universal use
▪ Three programs in standard
▪ Special routines: soak, short, intensive, decalcification and others
▪ High-performance washing system with VarioPower and soft start
▪ Intelligent filtration system with Mediamat and turbidity sensor
▪ Regeneration of the tank with three volume options to choose from
▪ Rinse aid dispenser (built in standard)
▪ Level of connection of external dispensers
▪ Thermostop
▪ Seamless tank, walls, heating elements, guides for baskets
▪ Drain pump
▪ Hinged door
▪ Door with ventilation position
▪ Touch display and one-button operation
▪ Duplicate Start button at an ergonomic level
▪ Three programs in standard
▪ Sensor “Out of Chemistry” for all 4 dispensers
▪ PIN codes for kitchen chef and service provider
▪ Hygiene and operating data logs
▪ Contact information for service company and chemistry supplier
▪ Turn on and off by timer
▪ Display of warning and error icons.
▪ leakage sensor
▪ Multifunctional output for external devices
▪ Free-flow boiler
▪ IPX5 moisture protection class
▪ Active energy management
▪ Standby mode with decreasing power of heating elements
▪ Double-layer chamber / door seal
▪ TEN with thermal protection
Options / Accessories:
▪ Preparing the machine for installing Solidos / SolidosDuo
▪ Built-in detergent dispenser with suction tubes with level sensor
▪ Built-in defoamer dispenser with suction tubes with level sensor
▪ TurboZyme System with Burning Solvent including dispenser,
suction tubes with level sensor
▪ Pre-rinse with cold water
▪ “Performance” heater package: 16.4 kW boiler, 10 kW tank
▪ Recovery system (UF-M Energy - energy saving 0.15 kWh per wash cycle) 1
▪ Folding (“falling”) door
▪ Cart for baskets UF-M / L (W x D: 772 x 825 mm)
▪ Widest set of accessories for baskets
▪ HighTemp version
Your benefits:
▪ Excellent cleaning result
▪ Easy, ergonomic control
▪ Low operating costs
▪ Highest service friendliness