Liquid for hydrophobic impregnation, PROTEX IDRO S-K, TIEFFE
PROTEX IDRO S-K - is an ideal way to make porous surfaces waterproof, prevents moisture and water shocks (during rain) to penetrate into the treated surface, but at the same time allowing it to "breathe." It is used in its pure form to impregnate porous building materials and materials that absorb moisture to give them water-repellent properties without disturbing their color and appearance, and also prevents the formation of mold and fungi, which are formed under the action of moisture. Excellent solution for the facades of houses and buildings, good resistance to alkalis allows it to be used on building materials that are alkaline, namely: fresh cement, lime, lime bricks, stone, etc. In addition, other porous materials, such as terracotta bricks, natural stone, recycled stone, cement, etc., can be made waterproof.
The benefits of using this tool:
• creates invisible cover
• non-sticky rubber hardening
• resistant to lime
• excellent penetration
• substrate insensitivity to moisture
• moisture penetration controller
• prevents the formation of mold and fungi
• resistant to UV rays, extending the service life of up to 10 years, depending on the conditions.
Instructions for use:
PROTEX IDRO S-K is available ready to use. Apply by spraying, roller or brush. - It is very important to apply the product evenly on the surface, so you need to cover the surface with a copious layer so that there are no stains. It is necessary to properly protect the surfaces that should not be treated with this tool (window and door frames, sills of shiny or leaded marble), since these stains are very difficult to remove with ordinary cleaning agents. The best results can be achieved by applying wet to wet, several layers in a short period of time on a slightly damp surface, because if we let the surface absorb time, its noticeable water-repellent properties will prevent the penetration of subsequent layers. The consumption of surface materials will naturally depend on its type and porosity, here are some general guidelines: Cement 2 - 4 m2 / l Cement mortar - bricks 2 - 3 m2 / l Porous cement 2 - 3 m2 / l Stone 4 - 8 m2 / l For best results, you should wash the surfaces and walls as best you can using a PULIPIETRA BASE cycle, then NEUTRAL ACID or PULIPIETRA ACID, and then NEUTRAL BASE. N.B. : after treatment with PROTEX IDRO S - K, it will take a period of time for complete drying, which will depend on the relative humidity and temperature (from 12 to 72 hours).
ATTENTION: MAKE SURE THAT THE SURFACE THAT YOU ARE GOING TO TREAT, WELL CLEANED AND ON IT WILL HAVE PELLETS OF THE OTHER THRESHOLD OTHERS THAT ARE POWERFUL WATER-RESISTANT MEANS WITHOUT HYTHMETTES THAT HAVE TO BE POWERED BY MEANS POSSIBLE WATER-WATER-RESISTING MEANS WITHOUT HYTHMETY
Storage: Keep containers closed and in a dry place. The shelf life is significantly reduced if the product is damaged by water or moisture.
Cautions: Check the information card for security reasons.
Tags: liquid, for, hydrophobic, impregnation, protex, idro, s-k, tieffe, protex, idro, s-k, cleaning, products