In Stock
Gel-shaped tool for removing paint and varnish products of glue, polyurethane paint, RIMOX GRAF S, TIEFFE
RIMOX GRAF S is a neutral paint remover that is activated with hydrogen peroxide, viscous, with a slight odor, and is designed to remove resistant finishing materials such as: epoxy, polyurethane, alkyd and other catalyzed paints.
RIMOX GRAF S has the following important advantages related to workplace safety: it lacks chlorinated solvents, kerosene solvents, phenols, chromic acid salts, ammonia, organic and inorganic acids. It can be applied to aluminum alloys, steel, cast iron and titanium when used as directed. The time of its contact with galvanized steel and alloys of chromed magnesium should be limited. It is not recommended to use it on high-resistance steel, magnesium, cadmium steel, rubber and plastics, which, as usual, should be properly protected. RIMOX GRAF S has the following characteristics: - ready to use: NO DILUTION - flash point: boiling point - lower waste treatment costs - safe use for personnel - moderate odor - viscosity: adheres to vertical surfaces and grooves - noticeably less consumption than with traditional tools for removing paints and varnishes.
Instructions for use:
The surface from which it is necessary to remove a varnish or paint, has to be previously washed up, degreased and dried. It is desirable that the ambient temperature was not lower than 18 ° C. Lower temperatures may slow down or block the activity of the agent. - Apply RIMOX GRAF S to the surface from which you want to remove varnish or paint, in a uniform layer and in such quantity that the color of the paint you want to remove disappears. Apply the product using special brushes or using standard equipment with a non-diffusing sprayer. Leave for the implementation of the reaction for the required time, but in any case, no more than 3-5 hours. Shaking with a brush or soft brush accelerates paint removal. The reaction rate increases with increasing temperature. Removal: Remove sludge and paint with a squeegee. Wash off with water under pressure or using a steam washing machine. If necessary, repeat the application in places where it is necessary.
Cautions: Read the information card about safety.
RIMOX GRAF S is a neutral paint remover that is activated with hydrogen peroxide, viscous, with a slight odor, and is designed to remove resistant finishing materials such as: epoxy, polyurethane, alkyd and other catalyzed paints.
RIMOX GRAF S has the following important advantages related to workplace safety: it lacks chlorinated solvents, kerosene solvents, phenols, chromic acid salts, ammonia, organic and inorganic acids. It can be applied to aluminum alloys, steel, cast iron and titanium when used as directed. The time of its contact with galvanized steel and alloys of chromed magnesium should be limited. It is not recommended to use it on high-resistance steel, magnesium, cadmium steel, rubber and plastics, which, as usual, should be properly protected. RIMOX GRAF S has the following characteristics: - ready to use: NO DILUTION - flash point: boiling point - lower waste treatment costs - safe use for personnel - moderate odor - viscosity: adheres to vertical surfaces and grooves - noticeably less consumption than with traditional tools for removing paints and varnishes.
Instructions for use:
The surface from which it is necessary to remove a varnish or paint, has to be previously washed up, degreased and dried. It is desirable that the ambient temperature was not lower than 18 ° C. Lower temperatures may slow down or block the activity of the agent. - Apply RIMOX GRAF S to the surface from which you want to remove varnish or paint, in a uniform layer and in such quantity that the color of the paint you want to remove disappears. Apply the product using special brushes or using standard equipment with a non-diffusing sprayer. Leave for the implementation of the reaction for the required time, but in any case, no more than 3-5 hours. Shaking with a brush or soft brush accelerates paint removal. The reaction rate increases with increasing temperature. Removal: Remove sludge and paint with a squeegee. Wash off with water under pressure or using a steam washing machine. If necessary, repeat the application in places where it is necessary.
Cautions: Read the information card about safety.
Tags: gel-shaped, tool, for, removing, paint, and, varnish, products, of, glue, polyurethane, paint, rimox, graf, s, tieffe, rimox, graf, s, cleaning, products