ECO gel-based paint and varnish remover, RIMOX GRAF A, TIEFFE
RIMOX GRAF A is a single-phase viscous paint remover with a moderate odor, designed to remove resistant finishing materials such as: epoxy, epoxy-polymer, polyurethane, alkyd and other catalyzed paints. Due to its viscosity, it easily sticks to vertical surfaces, remaining vlyunnym for a long time, significantly reduces the consumption of funds and increases the time of contact with the surface to achieve the best result. RIMOX GRAF A - has significant safety benefits in the workplace, as it does not contain chlorinated solvents, kerosene solvents, phenols, chromic acid salts, ammonia, organic and inorganic acids. It can also be applied to aluminum alloys, steel, cast iron and titanium when used as directed.
Instructions for use:
It is desirable that the ambient temperature was not lower than 15-18 ° C. Lower temperatures may slow down or block the action of the agent. Apply RIMOX GRAF A to the surface from which you want to remove varnish or paint, in a uniform layer, at least 1-2 mm. Apply the product with a roller or brush. Leave to carry out the reaction for a time from 10 to 45 minutes depending on how many layers you want to remove. The reaction rate increases with increasing temperature. - Do not apply to plastic or rubber materials. Removal: Remove sediment not means and peeling paint with a squeegee. Rinse with water and then pressurized with hydraulic cleaning. If necessary, repeat the application in places where it is necessary, paying attention to the surface was completely dried before the next application.
Cautions: Read the information card about safety.
Tags: eco, gel-based, paint, and, varnish, remover, rimox, graf, a, tieffe, rimox, graf, a, cleaning, products