GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
Bottle Coolers/Display Coolers TEFCOLD bottle coolers range from 20 to 1600 liters loading capacity. All models are constructed for heavy duty in hot environments. The powder coated outer cabinet is impact resistant and easy to clean. The inside is vacuum formed with rounded corners for easy cleaning. The door is tempered safety glass with either standard silver og black anodized aluminum frames. The internal fan-assisted cooling system ensures the exact same temperature in the whole cabinet and fast pull-down. It is automatically swiched off, when the door opens to improve energy consumption. Internal light also switch off automatically in some models. All models have internal light to present products in the best possible way. Depending on the size of the cabinet the models come with plastic-coated wire shelves for easy cleaning and with narrow threaded wires providing good stability of bottles and packages of up to 45 kg for each shelf. All models may be fitted with customized branding on the sides or the canopy.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
Professional refrigerators for cooling drinks Liebherr refrigeration cabinets meet the highest requirements: they provide optimal cooling, convenient control and high energy efficiency. Along with this, they are distinguished by their compact size and ease of service. From the choice of materials to the concept of components, the development of these devices always focuses on their reliability and durability. Liebherr’s diverse offer will allow you to choose a suitable refrigerated cabinet for any task.
600x800 BIG - 80 mm THICKNESS SUPERBIG REFRIGERAED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 80 mm. Self-closing doors with magnetic gaskets.Door micro switch. New Generation electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit.Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet. Innovative design. Great load-carrying capacity per shelf assured by 6 racks. Personalization options available. LT Cabinets: drainage and door frame heaters.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETSAvailable in 2 versions:• outside made of Stainless Steel;• outside made of white pre-painted sheet.Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel.Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm.Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
REFRIGERATED CABINETS EKO 600-1200 L Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness:60 mm. Self- closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 600 liter models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available.Compact Design.LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters,door micro swich, thermostatic valve
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 ISO REFRIGERATED CABINETS Available in 2 versions: • outside made of Stainless Steel; • outside made of white pre-painted sheet. Both versions are inside made of Stainless Steel while external bottom, external ceiling and back are made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets.Electronic front control panel with NTC probe Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models.Adjustable Stainless Steel feet (110/190 H mm). Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door micro swich, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
GN 2/1 and 600x400 EKO REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “mono-block type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation.Reversible door for 700 L models.Adjustable Stainless Steel feet Combined cabinets available only with evaporator disposed inside the refrigerated chamber.Personalization options available. LT Cabinets: electronic control panel with 2 NTC probes, evaporator heater, drainage and door frame heaters, door opening fan stop control, thermostatic valve.
GN 2/1 and 600x400 MID REFRIGERATED CABINETS Inside and outside made of Stainless Steel, except for external bottom, external ceiling and back made of Galvanized Steel. Internal rounded corners .Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 60 mm. Self-closing doors with magnetic gaskets. Door micro switch. Electronic front control panel with 2 NTC probes. Evaporator heater. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT cabinets designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Reversible door for 700 liter models. Adjustable Stainless Steel feet (110/190 H mm). Combined cabinets available only with evaporator disposed inside the refrigerated chamber. Personalization options available. LT Cabinets: drainage and door frame heaters, thermostatic valve.
