PIZZA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
PIZZA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
PIZZAA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
PIZZA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
PIZZAA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
PIZZA COUNTERS PLUG-IN Modern demands are combined with ancient recipes to keep up the tradition of the most famous Italian dish in the world. Coldline responds to these new requirements with a range of counters designed for perfect storage of dough and ingredients. Pizza counters are 80 cm deep, accommodate 7 EN60×40 containers per compartment, with operating temperatures of -2°+8°C. Use modular refrigeration units, drawers, and granite worktops to design the best solution for reach the best organisation, and to prepare your pizza even quicker. Choose whether you prefer the technical compartment to the right or left, with no price increase. The refrigeration system will always be kept a suitable distance from the oven, with benefits in terms of efficiency and energy-saving. The innovative dual air circulation system ensures maximum cooling efficiency and optimum temperature distribution even at full load. A delicate cold and indirect ventilation keep optimal humidity levels to ensure proper hydration and prevent superficial cracks from forming.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
COUNTERS PASTRY Hardwearing worktops to mix, shape and decorate fanciful creations. A controlled cold for perfectly uniform temperature and optimal humidity levels. The PASTRY counter is designed to provide the greatest possible storage capacity: 7 EN60×40 trays per door with 50 mm step or 1/3, 1/2 and 2/3 pull-out drawers. You can place the technical compartment to the right or left at a sufficient distance from heat sources with benefits in terms of efficiency and energy-saving. The hot gas automatic defrost (positive plug-in) operates for the time strictly necessary to defrost the ice, thereby reducing energy consumption.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
Counters TEFCOLD range of counters is extensive. It covers premium counters in quality SS304 steel, pizza tables, sandwich counters, saledettes, café tables as well as the economic solutions in 201 steel. The various models have different table top solutions, come in many different sizes and with or without drawers. Pizza tables are for example provided with granite table top. Some models are equipped with refrigerated topping units.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS MID NT 600 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners.Insulation in CFC free polyurethane high pressure injected. Insulation thickness:40 mm.Self-closing doors wit magnetic gaskets.Only positive temperature. Electronic front control panel with NTC probe.Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507.Refrigerated counters de-signed also for remote condensing unit.Completely automatic defrosting and condense water evaporation.Adjustable Stainless Steel feet . Personalization options available. Standard set up: 1 prepainted shelf and 2 Stainless Steel “L” Runners for each door.
REFRIGERATED COUNTERS MID NT 600 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners.Insulation in CFC free polyurethane high pressure injected. Insulation thickness:40 mm.Self-closing doors wit magnetic gaskets.Only positive temperature. Electronic front control panel with NTC probe.Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507.Refrigerated counters de-signed also for remote condensing unit.Completely automatic defrosting and condense water evaporation.Adjustable Stainless Steel feet . Personalization options available. Standard set up: 1 prepainted shelf and 2 Stainless Steel “L” Runners for each door.
REFRIGERATED COUNTERS MID NT 600 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners.Insulation in CFC free polyurethane high pressure injected. Insulation thickness:40 mm.Self-closing doors wit magnetic gaskets.Only positive temperature. Electronic front control panel with NTC probe.Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507.Refrigerated counters de-signed also for remote condensing unit.Completely automatic defrosting and condense water evaporation.Adjustable Stainless Steel feet . Personalization options available. Standard set up: 1 prepainted shelf and 2 Stainless Steel “L” Runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
REFRIGERATED COUNTERS EKO GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected.Insulation thickness: 40 mm. Self-closing doors with magnetic gaskets. Only positive temperature.Electronic front control panel with NTC probe . Ventilated cooling.Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated chiller counters designed also for remote condensing unit. Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available.Standard set up: GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
MID REFRIGERATED COUNTERS NT/LT - GN 1/1 Inside and outside made of Stainless Steel, except for the external bottom made of Galvanized Steel. Internal rounded corners. Insulation in CFC free polyurethane high pressure injected. Insulation thickness NT counters:40 mm. Insulation thickness LT counters:60 mm. Self-closing doors with magnetic gaskets. Electronic front control panel with NTC probe. Ventilated cooling. Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%) with gas R404A/R507. Refrigerated NT and LT counters designed also for remote condensing unit . Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet (110/190 H mm). Personalization options available (picture 1). LT counters: electronic control panel with 2 NTC probes,evaporator heater,drainage and door frame heaters,thermostatic valve. Standard set up: 1 GN 1/1 Rilsan shelf and 2 Stainless Steel “L” runners for each door.
