Alkali and acid resistant coating, PROTEX 100, TIEFFE
PROTEX 100 is a solvent-based liquid protective agent formulated to provide long-lasting and reliable protection of building materials, metal surfaces and plastic surfaces resistant to solvents.
PROTEX 100 does not have catalysts, it is a single component agent. It can be applied at different times, only on the parts that are most trampled, etc. Forms a solid transparent stable film that protects materials that are in an aggressive chemical environment: used to protect parts of buildings, cement flooring, ship and aircraft, aluminum structures, etc. Should not be used on Plexiglas, polycarbonates or other plastic surfaces that are not resistant to solvents. In addition, it can be applied to pre-painted surfaces if they are resistant to solvents.
Specifications :
LIQUID MEANS
Clear Liquid
% solids in the amount of 20 - 25
Point of discharge 25 ° C
Coating in m2 / Lt with a density of 25 microns 7-8
Specific weight 0.92
DRY FILM
Appearance light, transparent film
Adhesion to the surface Does not lag behind when applying cross-cutting
Chemical stability Resistant to alkalis and medium acids
Instructions for use:
Surface preparation:
Before applying PROTEX 100, oil, grease, dirt, etc. must be removed from the surface to ensure better adhesion to the surface.
Dilution:
PROTEX 100 is available in ready-to-use form, with a consistency suitable for application by spraying. If necessary, dilute with butyl vinegar or better nitrate.
Application by spray:
Apply using a brush, roller or pouring, depending on the structure of the surface you want to protect, as well as on the desired thickness. When applied by spraying, it is recommended to use equipment like Airless.
OPTIMAL DENSITY OF DRY FILM: 10-15 microns.
Caution: Familiarize yourself with the information card for safety reasons.
Tags: alkali, and, acid, resistant, coating, protex, 100, tieffe, protex, 100, cleaning, products